Central electrical system 12V / 24V DC power distribution 400A, TEXU400
TOP
The central electrical system as the heart of professional electrical installations
The TEXU400 is a DC high current distributor for up to 400A total current. Integrated are positive and negative busbars for connection of batteries / battery banks and consumers, as well as factory installed shunt bridge on the split negative rail for optional integration of a summation current measurement or / and a main switch. All connections are fused, fuse failure monitoring takes place on the consumer side. TEXU400 is ignition protected against flammable gases according to ISO8846.
Central electrics for motorhome and boat:
| Costs less The TEXU400 replaces the purchase of several individual components. The clever, round arrangement in a single device also leads to a large saving in materials - especially copper, the price of which has risen extremely recently. In the end, this amalgamation results in a tidy reduction in the final price. Saves space The elimination of individual components and the sophisticated design in round shape, not only saves money - it also requires much less installation space in your camper or boat. Compared to a square design with individual components, you save 46% valuable space! Quicker to install You mount only one part instead of many and save half of all cable crimps. Reduces error sources and contact resistances 50% fewer crimps - that also means 50% less stress with connections that can cause trouble. But also the stacking of cable lugs, is finally a thing of the past with the UFO. Why continue to be satisfied with inadequate ground distributions? With the UFO, every positive connection also gets its negative connection. And as an absolute novelty: A mega fuse with double input, e.g. for powerful inverters. |
 |
Components and functions at a glance:
| Bar with seal in lid The UFO is ignition protected according to SAE8846 with the integrated, circumferential bar. It may therefore also be installed in the engine compartment. Centered lock The centered latch on the cover makes it easy for you at any mounting location and allows one-handed opening and closing of the UFO. LED failure check Simple fault diagnosis: Fiber optics light up the failure check directly at the circuit labeling. The previous practice of removing fuses and searching upside down for faults in confined spaces is now a thing of the past. Plus rail for on-board batteries and consumers 2 × Mega fuse with max. 400A 9 × Midi/Ami fuse with max. 175A 4 × ATP/ATC/ATO fuse with max. 30A MEGA fuse with double screw connection For safe connection of powerful inverters. No stacking of cable lugs or suboptimal alternative constructions necessary! Spare fuses additional spare fuses kept on hand (1x MEGA, 2x MIDI, 2x ATO/ATC/ATP) Divided negative busbar Connect up to 4 battery banks, plus up to 10 high current and 4 standard loads. Shunt-bridge Allows a completely uncomplicated integration of a measuring shunt for the sum current. Simply unscrew and replace with the supplied plastic bar to separate the negative bars from the battery and loads. |
 |
Note: Individual electrical systems always consist of different components, these must be fused appropriately, therefore no prefabricated fuse set is included in the scope of delivery of the TEXU400. In our store you will of course find the appropriate fuses and installation material.
