Product information:
Modem QSTART is device with the ability to use Autoterm Control application on smartphone (available at Google Play and AppStore) to control any AUTOTERM air heater and liquid heaters.
Application "Autoterm Control" together with modem QSTART will let you to operate and oversee your Autoterm heater via GSM / LTE network.
Main advantages of "Autoterm Control" application:
- Remote Start/Stop of heater
- Start heater with pre-set working duration
- Current status check
- Temperature check
- Operation settings
* Modem QSTART uses micro sim card slot
To increase wiring length from modem QSTART till control panel a 2.6 meter extension wiring for control panels (assy.4269) can be used.
The wiring length from the control panel to the modem must not exceed 10 meters.
** Please note, For Modem QSTART to be connected to AUTOTERM Air series heater a 1.8 meter control panel wire (assy.2067) must be used.
The wiring length from the heater to modem must not exceed 2 meters.
*** Please note, Modem QSTART will not work if heater is equipped with control panel PU-22.
For modem QSTART to work, control panel of the heater must be changed to control panel PU-5, PU-27 or Comfort Control.
Download APP for iOS here
Download APP for Android here
Technical parameters:
Modem QSTART is device with the ability to use Autoterm Control application on smartphone (available at Google Play and AppStore) to control any AUTOTERM air heater and liquid heaters.
To connect QSTART modem to liquid heater 14TCmini, necessary additionally order Modem harness-adapter assy.3814
Application "Autoterm Control" together with modem QSTART will let you to operate and oversee your Autoterm heater via GSM / LTE network.
Main advantages of "Autoterm Control" application:
- Remote Start/Stop of heater
- Start heater with pre-set working duration
- Current status check
- Temperature check
- Operation settings
* Modem QSTART uses micro sim card slot
*** Please note, Modem QSTART will not work if heater is equipped with control panel PU-22.
For modem QSTART to work, control panel of the heater must be changed to control panel PU-5 or PU-27
Download APP for iOS here
Download APP for Android here
Supported GSM bands:
GSM/GPRS: 900/1800 Мhz
Supported LTE bands:
| LTE Band |
|
Up-link Band (MHz) |
|
Down-link Band (MHz) |
|
Band Width (MHz) |
|
Duplex Spacing (MHz) |
|
Band Gap (MHz) |
| LTE Band 1 |
|
1920-1980 |
|
2110-2170 |
|
60 |
|
190 |
|
130 |
| LTE Band 3 |
|
1710-1785 |
|
1805-1880 |
|
75 |
|
95 |
|
20 |
| LTE Band 5 |
|
824-849 |
|
869-894 |
|
25 |
|
45 |
|
20 |
| LTE Band 7 |
|
2500-2570 |
|
2620-2690 |
|
70 |
|
120 |
|
50 |
| LTE Band 8 |
|
880-915 |
|
925-960 |
|
35 |
|
45 |
|
10 |
| LTE Band 20 |
|
832-862 |
|
791-821 |
|
30 |
|
-41 |
|
71 |
| LTE Band 28 |
|
703-748 |
|
758-803 |
|
45 |
|
55 |
|
10 |
Modem Qstart is suitable following AUTOTERM air heaters:
- AUTOTERM Air 2D if connected to PU-5 / PU-27 control panel
- AUTOTERM Air 4D if connected to PU-5 / PU-27 control panel
- AUTOTERM Air 8D if connected to PU-5 / PU-27 control panel
- AUTOTERM Air 9D if connected to PU-5 / PU-27 control panel
Modem Qstart is suitable following AUTOTERM liquid heaters:
- AUTOTERM Flow 5 (Diesel/Petrol) with serial numbers that start with "E...." (Previously BINAR 5S)
- AUTOTERM Flow 14D if connected to PU-27 control panel
