Control panel PU-5
Voltage: 12V / 24V
Technical parameters:
Simple Control panel (PU-5), EU/AT0030
This control panel is suitable with all PLANAR air heaters 12V and 24V.
“Power mode”
(If the external sensor is not connected) |
- Designed for quickest possible heating of the space;
- The heater operates continuously at a set power.
|
| |
|
** “Temperature mode”
(If the external sensor
is connected) |
- Designed to heat the space to the required temperature;
- Heat output decreases as the difference between the desired temperature and the temperature in the space decreases.
|
| |
|
| * “Ventilation mode” |
- Designed for air circulation in the space.
|
| |
|
** “Ventilation during
heating” - function
(If the external sensor
is connected) |
- Designed to maintain the required temperature in the space;
- After the required temperature is reached, the space heating is stopped and space air circulation is performed;
- Controls the space temperature; if the temperature drops below the set point, the heater will start in Ventilation mode.
|
Dimensions: 50 x 36 x 18 mm
* Please note, that PLANAR air heaters with production date 16.11.2016 or older does not support Ventilation mode. You can check your air heaters PLANAR production date on the warranty card.
** Please note, that all PLANAR air heaters need external temperature sensor (assy.1458), so that the "Power mode" and "Ventilation during heating” function would work.
previous art. no. EU/3765 (EU/3520)
